wholesale Skiving Tube


New Commander
Thread starter #1
Rolled tube (Skived Tubing) surface is good quality:
Cross-textured surface is conducive to the storage of lubricating oil and oil film to maintain. A higher surface support rate (hole and shaft of the actual contact area and the ratio between the two with the ratio), which can withstand greater load, wear resistance, thereby enhancing the service life of the product. Honing speed is low (a few one-tenth of the grinding speed), and the stone and the hole is surface contact, so the average grinding pressure of each abrasive is small, so honing, the workpiece heat is very small, almost the surface of the workpiece No thermal damage and deterioration layer, small deformation. Honing surface almost no embedding sand and squeeze the hard layer.
Precision Skiving tubes commonly used materials
10# 0.07~0.13 0.17~0.37 0.35~0.65 ≤0.035 ≤0.035
20# 0.17~0.23 0.17~0.37 0.35~0.65 ≤0.035 ≤0.035
35# 0.32~0.39 0.17~0.37 0.35~0.65 ≤0.035 ≤0.035
45# 0.42~0.50 0.17~0.37 0.50~0.80 ≤0.035 ≤0.035
40cr 0.37~0.44 0.17~0.37 0.50~0.80 ≤0.035 ≤0.035 0.08~1.10
25Mn 0.22~0.2 0.17~0.37 0.70~1.00 ≤0.035 ≤0.035 ≤0.25
All our technology innovation only for one aim—the best quality.
Process design and validation before bulk production.
Strictly control on all raw and auxiliary materials, All raw materials reach the world advanced level.
On—site inspection to all processes, inspection record keep traceable for 3 years.wholesale Skiving Tube